Product Experts Available 1-800-284-4096

Tri Five Chevy Parts

Initially, General Motors executives wanted an entirely new car for 1957, but production delays necessitated the 1955–56 design for one more year. Ed Cole, chief engineer for Chevrolet, dictated a series of changes that significantly increased the cost of the car. These changes included a new dashboard, sealed cowl, and the relocation of air ducts to the headlight pods, which resulted in the distinctive chrome headlight that helped make the '57 Chevrolet a classic. Fourteen-inch wheels replaced the fifteen-inch wheels from previous years to give the car a lower stance, and a wide grille was used to give the car a wider look from the front. The now famous '57 Chevrolet tailfins were designed to duplicate the wide look in the rear. Bel Air models were given gold trim: the grille, front fender chevrons, hood, and trunk script were all rendered in anodized gold. The 1957 Chevrolets did not have an oil pressure gauge or a voltmeter.[1] The base engine was an inline 6-cylinder called the Blue Flame Six. The engine was smoother running than the V-8. Carburetion came from a single one-barrel carburetor.

1955 CHEVY PARTS

1955 CHEVY 150 1955 CHEVY 210 1955 CHEVY BEAUVILLE
1955 CHEVY BEL-AIR 1955 CHEVY NOMAD 1955 CHEVY TOWNSMAN
 

For the 1955 model year, Chevrolet’s passenger car was transformed by a ground-up redesign that offered something that the previous years didn’t– stylish sizzle. The wheelbase and series names, One-Fifty, Two-Ten and Bel Air, were about the only things that were carried over. 1955 brought about big improvements that included better brakes, handling, steering and interior room. New was the 265 cubic-inch V8 (162 hp) and an improved 235 cubicinch six-cylinder engine (123 and 136 hp versions). The Bel Air-based Nomad was also introduced for the ’55 model year. Chevy had transitioned from producing a pedestrian family car to a distinctive, sporty, youthful car. Other than the dramatic new styling, the new V8 was probably the most important feature for the 1955 model– the most changed Chevrolet since World War II. With a slick new body and that powerful new engine, Chevrolet advertised the 1955 as “The Hot One”. Models available ranged from 2 to 4 door, sedan, coupe, station wagon, and convertible. Solid, as well as twotone colors were available with the upper fenders, roof and rear deck painted one shade and a chrome strip molding separating the body side color. Chevrolet produced a record number of cars and trucks in 1955, which accounted for a quarter of all car and truck sales in the United States. The 1955 Chevy had a classic simplicity of design that was a great success, and new power to match!

1955 Chevy Bel Air Parts
’55 Bel Air Total Production: 800,968
1955 Chevy 210 Parts
’55 Bel Air Total Production: 800,968
1955 Chevy 150 Parts
’55 Bel Air Total Production: 800,968
 

1956 CHEVY PARTS

1956 CHEVY 150 1956 CHEVY 210 1956 CHEVY BEAUVILLE
1956 CHEVY BEL-AIR 1956 CHEVY NOMAD 1956 CHEVY TOWNSMAN
 

The 1956 Chevrolet boasted both design and mechanical upgrades. The “Hot One” got even hotter. Overall styling was subtly revised with a sharper looking grille and more polished stainless trim decorating the sides of the car. The restyled grille and integrated parking lamps resulted in Cadillac-like good looks. The 262 cube Turbo-Fire V8 was rated at 170 hp (when equipped with the automatic transmission, 162 hp when equipped with a manual), and the optional 4-barrel Turbo-Fire V8 with dual exhausts was rated at 205 horsepower. Even the Blue Flame 232 cubic-inch six-cylinder was beefed up, now boasting 140 hp. The three familiar series– Bel Air, Two- Ten and One-Fifty, were now offered in 19 models. One was a new body style this year– the four-door hardtop. It was called the Sport Sedan and was advertised as “Embodying the youthfulness of a convertible, the practicality of a hardtop and the convenience of a sedan”. Customers at the time were demanding bigger, brighter cars with more power and performance, and they got it with the new ’56 Chevrolet. General Motors knew that if a car was to sell well it had to look new, even if it wasn’t entirely. Though 1956 was a transition year, the model did bring about a number of firsts.

1956 Chevy Bel Air Parts
’56 Bel Air Total Production: 800,968
1956 Chevy 210 Parts
’56 Bel Air Total Production: 800,968
1956 Chevy 150 Parts
’56 Bel Air Total Production: 800,968
 

1957 CHEVY PARTS

1957 CHEVY 150 1957 CHEVY 210 1957 CHEVY BEAUVILLE
1957 CHEVY BEL-AIR 1957 CHEVY NOMAD 1957 CHEVY TOWNSMAN
 

The 1957 Chevrolet is clearly the most popular classic collector car ever manufactured in the USA. The ’57 models were advertised as “Sweet, Smooth and Sassy!” The tailfins on the ’57 are perhaps the most iconic feature of any automobile, ever. The base engine this year was still the Blue Flame 232 cubic-inch six-cylinder, rated at 140 hp. The Turbo-Fire 265 V8 was still available, rated at 162 hp. The new 283 cubic-inch V8 was rated at (depending on carburetion and transmission choices) 185 hp, 220 hp, or 245 hp. The fuel-injected 283 put out one horsepower per cubic-inch– 283. An all-new Turboglide transmission was also introduced for 1957. Twin hood “rockets”, a larger windshield, pointed fin-like rear quarter panels and a new grille were some of the new styling attributes. 1957 Chevys had the biggest and boldest look amongst low priced American automobiles. Although engineering changes were extensive, styling was even more important to sales. Styling on the ’57 Chevy was deliberately fashioned to make the car look as large as possible, since they were slightly smaller than their competition. Massive new front and rear bumpers, a large grille and unique and distinct rear fins all helped make the car look much larger and lower than it actually was.

1957 Chevy Bel Air Parts
’57 Bel Air Total Production: 800,968
1957 Chevy 210 Parts
’57 Bel Air Total Production: 800,968
1957 Chevy 150 Parts
’57 Bel Air Total Production: 800,968
 
4