Product Experts Available 1-800-284-4096

Filter Your Result

  1. Remove This Item Brand: 'Ram Clutches'
CATEGORY
  1. Car Care, Protection and Tools (2)
  2. Transmission and Driveline (9)
  3. Upgrades (2)
PRICE RANGE
  1. (2)
  2. (4)
  3. (7)
 

CHEVY RAM CLUTCHES PARTS & ACCESSORIES

CHEVY Ram Clutches
Ram Clutches began in 1972 with the quest to design and build better race clutches than were available at the time. RAM’s three-paddle ‘Cleaning Lady’ clutch disc was at the forefront of this redesign. Until that time, most racing clutches were made from organic compounds which didn’t provide the durability or consistency necessary for racing. In 1978 Ram patented the poly-encapsulated spring design and the three paddle disc evolved into the current six paddle design. RAM is heavily involved in providing clutch solutions such as the Street Dual and hydraulics systems that allow for major modifications while still providing street driveability.
13 Item(s) Show per page Grid  List 
Chevy Clutch Pressure Plate, Diaphragm-Type, 11", 1955-1957 Part # 57-213090-1
Performance Holding Power Without Increased Pedal Pressure Heavy-Duty 3000-Pound Static Pressure Springs Perfect For Street & Occasional Racing Use Manufactured By RAM Clutches Learn More

Was: $219.99 ea.

Now: $185.99 ea.

Chevy Clutch Disc, 11", 26-Spline, 1955-1957 Part # 57-213088-1
Heavy-Duty Eight-Spring Hub Assemblies Premium Quality Facing Material To Minimize Slippage Manufactured By Ram Clutches Learn More
$148.99 ea.
Chevy Flywheel, Manual Transmission, For Internally Balanced Engines, Steel, 1955-1957 Part # 57-213086-1
Fits Pre-1986 Internally Balanced Small & Big Block Engines CNC Machined 33 Pound Billet Steel 168 Tooth Accepts 10.5" & 11" Clutches Will Fit Stock Cast Iron Or Aluminum Bellhousings Manufactured By RAM Clutches Learn More
$245.99 ea.
Chevy Flywheel, Manual Transmission, For Externally Balanced Engines, Steel, 1955-1957 Part # 57-213091-1
Fits Pre-1986 Externally Balanced Small & Big Block Engines CNC Machined 33 Pound Billet Steel 168 Tooth Accepts 10.5" & 11" Clutches Will Fit Stock Cast Iron Or Aluminum Bellhousings Manufactured By RAM Clutches Learn More
$263.99 ea.
Chevy Clutch Disc, 11", 10-Spline, 1955-1957 Part # 57-213087-1
Heavy-Duty Eight-Spring Hub Assemblies Premium Quality Facing Material To Minimize Slippage Manufactured By Ram Clutches Learn More
$148.99 ea.
Chevy Flywheel, Manual Transmission, For Internally Balanced Engines, Aluminum, 1955-1957 Part # 57-213089-1
Fits Pre-1986 Internally Balanced Small & Big Block Engines CNC Machined 18 Pound Billet Aluminum 1/4" Thick Heat Shield For Maximum Heat Dissipation Without Warping 168 Tooth Accepts 10.5" & 11" Clutches Will Fit Stock Cast Iron Or Aluminum Bellhousings Manufactured By RAM Clutches Learn More

Was: $411.99 ea.

Now: $332.99 ea.

Chevy Flywheel, Manual Transmission, For Externally Balanced Engines, Aluminum, 1955-1957 Part # 57-213092-1
Fits Pre-1986 Externally Balanced Small & Big Block Engines CNC Machined 18 Pound Billet Aluminum 1/4" Thick Heat Shield For Maximum Heat Dissipation Without Warping 168 Tooth Accepts 10.5" & 11" Clutches Will Fit Stock Cast Iron Or Aluminum Bellhousings Manufactured By RAM Clutches Learn More
$409.99 ea.
Chevy Flywheel, Manual Transmission, Internally Balanced, Steel, Use On 1986-Up Engines, 1955-1957 Part # 57-246955-1
Fits 1986-Up Internally Balanced Small Block Engines With One-Piece Rear Main Seal CNC Machined 33 Pound Billet Steel 168 Tooth Accepts 10.5" & 11" Clutches Will Fit Stock Cast Iron Or Aluminum Bellhousings Manufactured By RAM Clutches Learn More
$312.99 ea.
Chevy Flywheel, Manual Transmission, Internally Balanced, Aluminum, Use On 1986-Up Engines, 1955-1957 Part # 57-246947-1
Fits 1986-Up Internally Balanced Small Block Engines With One-Piece Rear Main Seal CNC Machined 18 Pound Billet Aluminum 1/4" Thick Heat Shield For Maximum Heat Dissipation Without Warping 168 Tooth Accepts 10.5" & 11" Clutches Will Fit Stock Cast Iron Or Aluminum Bellhousings Manufactured By RAM Clutches Learn More
$399.99 ea.
Chevy Flywheel, Billet Aluminum, LS Engine, Conversion, 1955-1957 Part # 57-255197-1
Replacement For Original Cast Flywheels True Balanced Aluminum Flywheel CNC Machined RAM billet flywheels are precision machined in house, surface ground and match balanced for the application. Aluminum flywheels feature 1/4 inch thick inserts for maximum heat dissipation and long service life. Learn More
$417.99 ea.
Chevy Flywheel, Billet Steel, LS Engines, Conversion, 1955-1957 Part # 57-255199-1
Replacement for Original Cast Flywheels True Balanced Steel Flywheel CNC Machined From Certified Materials and Exceeds SFI Specifications   RAM billet steel flywheels are recommended as a replacement for factory cast flywheels in high performance and racing vehicles. Cast flywheels are not explosion proof and can be dangerous when used in high performance applications at higher RPMs. Learn More
$279.99 ea.
Ram Clutch Alignment Tool, 10-Spline Part # 57-295625-1
1040 Plain-Carbon Steel Construction Useful for Dual Disc Systems 10-Spline GM Applications Pilot Bearing Tip Saves Time On Installations Ram Clutches has introduced a new metallic clutch alignment tool. This is for 10-spline GM applications. Machined from 1040 plain-carbon steel and each alignment tool features a pilot bearing tip to suit GM application. While plastic clutch alignment tools have been invaluable in clutch installations, they are not always exact. Ram?s new metallic device is a professional tool that ensures accuracy. In addition, it is especially useful in centering dual-disc assemblies. Because its long shaft diameter is smaller than its splined diameter, this device allows you the convenience of installing the flywheel on the engine, slipping the alignment tool into the pilot bearing and sliding the discs onto the tool one at a time with the floater plate sandwiched between. Learn More
$52.99 ea.
Ram Clutch Alignment Tool, 26-Spline Part # 57-295624-1
1040 Plain-Carbon Steel Construction Useful for Dual Disc Systems 26-Spline GM Applications Pilot Bearing Tip Saves Time On Installations Ram Clutches has introduced a new metallic clutch alignment tool. This is for 26-spline GM applications. Machined from 1040 plain-carbon steel and each alignment tool features a pilot bearing tip to suit GM application. While plastic clutch alignment tools have been invaluable in clutch installations, they are not always exact. Ram?s new metallic device is a professional tool that ensures accuracy. In addition, it is especially useful in centering dual-disc assemblies. Because its long shaft diameter is smaller than its splined diameter, this device allows you the convenience of installing the flywheel on the engine, slipping the alignment tool into the pilot bearing and sliding the discs onto the tool one at a time with the floater plate sandwiched between. Learn More
$47.99 ea.
13 Item(s) Show per page Grid  List