Product Experts Available 1-800-284-4096

CHEVY BEL AIR, 210 & 150 INTAKE SYSTEMS FOR ALL YEARS AND MODELS

Filter Your Result

BRAND
  1. (71)
PRICE RANGE
  1. (25)
  2. (4)
  3. (32)
  4. (25)
 
Items 1 to 24 of 86 total Show per page Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. Next Page
Grid  List 
Ultimate LS Fuel Injection Kit for LS1/LS2/LS6 - 500HP w/o Trans. Control | FiTech - 70001 Part # 57-389090-1
The Fastest AND Easiest Way  To Get Your New Or Pre-Owned LS Crate Engine Up And Running Eliminates Sourcing Mismatched Parts, Cutting & Splicing Old Harnesses, & Re-Flashed ECU's from "Craigs List" Tuners Black Anodized Aluminum Parts Are Corrosion Resistant & Look Tough Self-Learning ECU With Data Logging & Touch Screen Controller For Easy Setup & Configuration On The Fly Programmable Target Air Fuel Ratio & Timing (If Desired) Works With  All 1997-2004 LS1/LS6 and 2005-2007 LS2 Engines Supports Engines Up To 500 HP, Naturally Aspirated (Non-Forced Induction) NOTE:  MUST Use Factory Coil Pack Sub-Harness.  Does NOT Include Automatic Transmission Control (See P/N 389119) SPECIFICATIONS: Quality Level:  High Performance Upgrade Intake Manifold Construction:  Fabricated Aluminum, 3MM, TIG Welded Intake Manifold Finish:  Black Anodized Aluminum With Embossed FiTech logo Intake Manifold RPM Range:  1,500 RPM to 6,500 RPM Metering Style:  Fully Sequential Fuel & Spark With Individual Cylinder Trim Tunability:  Use Programmable Or Self Tuning Throttle Body:  92MM Billet Aluminum, Black Anodized, Cable Operated, Progressive Linkage Pulley With Double Return Spring & Adjustable Stop, Parabolic Inlet Matching For Smooth Throttle Transitions (Same As OE) Fuel Rails:  High Flow Billet Aluminum, Black Anodized, AN Fittings & Fuel Crossover Fuel Injectors:  Flow Matched 36 Lb./Hour Engine Block Style:  Stock / OEM Standard Deck Coil Compatibility:  Factory Stock Car & Truck LS1, LS6, LS2 Crank & Cam Compatibility:  24X and 58X Custom Cam Friendly:  Yes Speedometer Output Driver:  Yes, Works With Most Speedometers Tachometer Output Driver:  Yes, Works With Most Tachometers (5V) Transmission Control:  No (Available With Different Model - 70002) Compatible With Superchargers, Turbo, Nitrous:  No (Available With Different Model - 70003 750HP w/o Trans. Control or 70004 750HP w/Trans. Control) What's In The Box:  Low Profile 92MM Inlet, Aluminum Fabricated Intake, Billet Fuel Rails With AN Fittings & Fuel Crossover, Hi Flow Cable Operated 92MM Throttle Body, Progressive Linkage Pulley With Double Return Spring & Adjustable Stop, Electronics Calibration Module,Wiring Harness, Bosch Wide Band Controlled O2 Sensor (Self Learning), Stainless Steel Oxygen Sensor Bung (Clamp Or Weld-On), 1 Bar MAP Sensor, Coolant Temp. Sensor, IAT Sensor, TPS Sensor, IAC Motor, All Necessary Hardware & CNC Machined O-Ring Gaskets, ECM With Wiring Harness & Hand Held Controller w/Windshield Mount Manufacturer's Limited Warranty:  1-Year All Parts Except ECM, Lifetime On ECM Only Product Weight:  32.6 Lbs. Product Dimensions:  28" x 16" x 10" Complete Self Tuning Induction Systems for LS engines designed for the do-it-yourself Hot Rodder to the professional EFI tuner! This system is ready to go with everything needed to complete the induction system of your LS engine and get you on the road easily and faster than any system on the market today. Forget sourcing mismatched parts and cutting and splicing old harnesses and re-flashed ECU’s from “Craigs List” tuners. FiTech’s Ultimate EFI is a complete Kit. Suitable for that junkyard 5.3 to a stroker 427, we have you covered! Check out the list of features and you will wonder why it’s never been so simple to ditch that old factory hardware or top off that fresh long block. We have taken the work out of getting your new or pull-out LS up and running in a flash. That’s why we call this kit the ULTIMATE EFI. Learn More
$1,614.99 Kit
Ultimate LS Fuel Injection Kit for LS1/LS2/LS6 - 500HP With Trans. Control | FiTech - 70002 Part # 57-389119-1
The Fastest AND Easiest Way  To Get Your  New Or Pre-Owned LS Crate Engine Up And Running Eliminates Sourcing Mismatched Parts, Cutting & Splicing Old Harnesses, & Re-Flashed ECU's from "Craigs List" Tuners Black Anodized Aluminum Parts Are Corrosion Resistant & Look Tough Self-Learning ECU With Data Logging & Touch Screen Controller For Easy Setup & Configuration On The Fly Programmable Target Air Fuel Ratio & Timing (If Desired) Built-In Transmission Control For GM 4L60, 4L65, 4L70, or 4L80 Automatic Transmissions Works With  All 1997-2004 LS1/LS6 and 2005-2007 LS2 Engines Supports Up To 500HP, Naturally Aspirated (Non-Forced Induction) NOTE:  MUST Use Factory Coil Pack Sub-Harness SPECIFICATIONS: Quality Level:  High Performance Upgrade Intake Manifold Construction:  Fabricated Aluminum, 3MM, TIG Welded Intake Manifold Finish:  Black Anodized Aluminum With Embossed FiTech logo Intake Manifold RPM Range:  1,500 RPM to 6,500 RPM Metering Style:  Fully Sequential Fuel & Spark With Individual Cylinder Trim Tunability:  Use Programmable Or Self Tuning Throttle Body:  92MM Billet Aluminum, Black Anodized, Cable Operated, Progressive Linkage Pulley With Double Return Spring & Adjustable Stop, Parabolic Inlet Matching For Smooth Throttle Transitions (Same As OE) Fuel Rails:  High Flow Billet Aluminum, Black Anodized, AN Fittings & Fuel Crossover Fuel Injectors:  Flow Matched 36 Lb./Hour Engine Block Style:  Stock / OEM Standard Deck Coil Compatibility:  Factory Stock Car & Truck LS1, LS6, LS2 Crank & Cam Compatibility:  24X and 58X Custom Cam Friendly:  Yes Speedometer Output Driver:  Yes, Works With Most Speedometers Tachometer Output Driver:  Yes, Works With Most Tachometers (5V) Transmission Control:    Included, Works With 4L60, 4L65, 4L70, or 4L80 G.M. Transmissions Compatible With Superchargers, Turbo, Nitrous:  No (Available With Different Model - 70004 750HP w/Trans. Control) What's In The Box:  Low Profile 92MM Inlet, Aluminum Fabricated Intake, Billet Fuel Rails With AN Fittings & Fuel Crossover, Hi Flow Cable Operated 92MM Throttle Body, Progressive Linkage Pulley With Double Return Spring & Adjustable Stop, Electronics Calibration Module,Wiring Harness, Bosch Wide Band Controlled O2 Sensor (Self Learning), Stainless Steel Oxygen Sensor Bung (Clamp Or Weld-On), 1 Bar MAP Sensor, Coolant Temp. Sensor, IAT Sensor, TPS Sensor, IAC Motor, All Necessary Hardware & CNC Machined O-Ring Gaskets, ECM With Wiring Harness & Hand Held Controller w/Windshield Mount, Installation Instructions Manufacturer's Limited Warranty:  1-Year All Parts Except ECM, Lifetime On ECM Only Product Weight:  32.6 Lbs. Product Dimensions:  28" x 16" x 10" Complete Self Tuning Induction Systems for LS engines designed for the do-it-yourself Hot Rodder to the professional EFI tuner! This system is ready to go with everything needed to complete the induction system of your LS engine and get you on the road easily and faster than any system on the market today. Forget sourcing mismatched parts and cutting and splicing old harnesses and re-flashed ECU’s from “Craigs List” tuners. FiTech’s Ultimate EFI is a complete Kit. Suitable for that junkyard 5.3 to a stroker 427, we have you covered! Check out the list of features and you will wonder why it’s never been so simple to ditch that old factory hardware or top off that fresh long block. We have taken the work out of getting your new or pull-out LS up and running in a flash. That’s why we call this kit the ULTIMATE EFI. Learn More
$1,885.99 Kit
Ultimate LS Fuel Injection Kit for LS1/LS2/LS6 - 750HP w/o Trans. Control | FiTech - 70003 Part # 57-389120-1
The Fastest AND Easiest Way  To Get Your  New Or Pre-Owned LS Crate Engine Up And Running Eliminates Sourcing Mismatched Parts, Cutting & Splicing Old Harnesses, & Re-Flashed ECU's from "Craigs List" Tuners Black Anodized Aluminum Parts Are Corrosion Resistant & Look Tough Self-Learning ECU With Data Logging & Touch Screen Controller For Easy Setup & Configuration On The Fly Programmable Target Air Fuel Ratio & Timing (If Desired) Works With  All 1997-2004 LS1/LS6 and 2005-2007 LS2 Engines Supports Engines Up To 750 HP (Including Supercharged, Turbocharged, & Nitrous) NOTE:  MUST Use Factory Coil Pack Sub-Harness.  Does NOT Include Automatic Transmission Control SPECIFICATIONS: Quality Level:  High Performance Upgrade Intake Manifold Construction:  Fabricated Aluminum, 3MM, TIG Welded Intake Manifold Finish:  Black Anodized Aluminum With Embossed FiTech logo Intake Manifold RPM Range:  1,500 RPM to 6,500 RPM Metering Style:  Fully Sequential Fuel & Spark With Individual Cylinder Trim Tunability:  Use Programmable Or Self Tuning Throttle Body:  102MM Billet Aluminum, Black Anodized, Cable Operated, Progressive Linkage Pulley With Double Return Spring & Adjustable Stop, Parabolic Inlet Matching For Smooth Throttle Transitions (Same As OE) Fuel Rails:  High Flow Billet Aluminum, Black Anodized, AN Fittings & Fuel Crossover Fuel Injectors:  Flow Matched  66 Lb./Hour Engine Block Style:  Stock / OEM Standard Deck Coil Compatibility:  Factory Stock Car & Truck LS1, LS6, LS2 Crank & Cam Compatibility:  24X and 58X Custom Cam Friendly:  Yes Speedometer Output Driver:  Yes, Works With Most Speedometers Tachometer Output Driver:  Yes, Works With Most Tachometers (5V) Knock Sensor Control:  Yes O2 Sensor Control:  Yes, Dual Bosch Wide Band With Dual Trim Control (Self Learning) Transmission Control:  No (Available With Different Model - 70004) Compatible With Supercharger, Turbo, Nitrous:  Yes MAP Sensor:  3 Bar, Automatically Detects Up To 30 PSI Boost What's In The Box:  Low Profile 92MM Inlet, Aluminum Fabricated Intake, Billet Fuel Rails With AN Fittings & Fuel Crossover, Hi Flow Cable Operated 92MM Throttle Body, Progressive Linkage Pulley With Double Return Spring & Adjustable Stop, Electronics Calibration Module,Wiring Harness, Bosch Dual Wide Band Controlled O2 Sensor With Dual Trim Control  (Self Learning), Stainless Steel Oxygen Sensor Bung (Clamp Or Weld-On), 3 Bar MAP Sensor, Coolant Temp. Sensor, IAT Sensor, TPS Sensor, IAC Motor, All Necessary Hardware & CNC Machined O-Ring Gaskets, ECM With Wiring Harness & Hand Held Controller w/Windshield Mount Manufacturer's Limited Warranty:  1-Year All Parts Except ECM, Lifetime On ECM Only Product Weight:  32.6 Lbs. Product Dimensions:  28" x 16" x 10" Complete Self Tuning Induction Systems for LS engines designed for the do-it-yourself Hot Rodder to the professional EFI tuner! This system is ready to go with everything needed to complete the induction system of your LS engine and get you on the road easily and faster than any system on the market today. Forget sourcing mismatched parts and cutting and splicing old harnesses and re-flashed ECU’s from “Craigs List” tuners. FiTech’s Ultimate EFI is a complete Kit. Suitable for that junkyard 5.3 to a stroker 427, we have you covered! Check out the list of features and you will wonder why it’s never been so simple to ditch that old factory hardware or top off that fresh long block. We have taken the work out of getting your new or pull-out LS up and running in a flash. That’s why we call this kit the ULTIMATE EFI. Learn More
$1,885.99 Kit
Ultimate LS Fuel Injection Kit for LS1/LS2/LS6 - 750HP With Trans. Control | FiTech - 70004 Part # 57-389121-1
The Fastest AND Easiest Way  To Get Your  New Or Pre-Owned LS Crate Engine Up And Running Eliminates Sourcing Mismatched Parts, Cutting & Splicing Old Harnesses, & Re-Flashed ECU's from "Craigs List" Tuners Black Anodized Aluminum Parts Are Corrosion Resistant & Look Tough Self-Learning ECU With Data Logging & Touch Screen Controller For Easy Setup & Configuration On The Fly Programmable Target Air Fuel Ratio & Timing (If Desired) Works With  All 1997-2004 LS1/LS6 and 2005-2007 LS2 Engines Supports Engines Up To 750 HP  (including Supercharged, Turbocharged, & Nitrous) Includes Transmission Control For 4L60, 4L65, 4L70, or 4L80 G.M. transmissions NOTE:  MUST Use Factory Coil Pack Sub-Harness.  SPECIFICATIONS: Quality Level:  High Performance Upgrade Intake Manifold Construction:  Fabricated Aluminum, 3MM, TIG Welded Intake Manifold Finish:  Black Anodized Aluminum With Embossed FiTech logo Intake Manifold RPM Range:  1,500 RPM to 6,500 RPM Metering Style:  Fully Sequential Fuel & Spark With Individual Cylinder Trim Tunability:  Use Programmable Or Self Tuning Throttle Body:  102MM Billet Aluminum, Black Anodized, Cable Operated, Progressive Linkage Pulley With Double Return Spring & Adjustable Stop, Parabolic Inlet Matching For Smooth Throttle Transitions (Same As OE) Fuel Rails:  High Flow Billet Aluminum, Black Anodized, AN Fittings & Fuel Crossover Fuel Injectors:  Flow Matched  66 Lb./Hour Engine Block Style:  Stock / OEM Standard Deck Coil Compatibility:  Factory Stock Car & Truck LS1, LS6, LS2 Crank & Cam Compatibility:  24X and 58X Custom Cam Friendly:  Yes Speedometer Output Driver:  Yes, Works With Most Speedometers Tachometer Output Driver:  Yes, Works With Most Tachometers (5V) Knock Sensor Control:  Yes O2 Sensor Control:  Yes, Dual Bosch Wide Band With Dual Trim Control (Self Learning) Transmission Control:  No (Available With Different Model - 70004) Compatible With Supercharger, Turbo, Nitrous:  Yes MAP Sensor:  3 Bar, Automatically Detects Up To 30 PSI Boost What's In The Box:  Low Profile 92MM Inlet, Aluminum Fabricated Intake, Billet Fuel Rails With AN Fittings & Fuel Crossover, Hi Flow Cable Operated 92MM Throttle Body, Progressive Linkage Pulley With Double Return Spring & Adjustable Stop, Electronics Calibration Module,Wiring Harness, Bosch Dual Wide Band Controlled O2 Sensor With Dual Trim Control  (Self Learning), Stainless Steel Oxygen Sensor Bung (Clamp Or Weld-On),  3 Bar MAP Sensor, Coolant Temp. Sensor, IAT Sensor, TPS Sensor, IAC Motor, All Necessary Hardware & CNC Machined O-Ring Gaskets, ECM With Wiring Harness & Hand Held Controller w/Windshield Mount Manufacturer's Limited Warranty:  1-Year All Parts Except ECM, Lifetime On ECM Only Product Weight:  32.6 Lbs. Product Dimensions:  28" x 16" x 10" Complete Self Tuning Induction Systems for LS engines designed for the do-it-yourself Hot Rodder to the professional EFI tuner! This system is ready to go with everything needed to complete the induction system of your LS engine and get you on the road easily and faster than any system on the market today. Forget sourcing mismatched parts and cutting and splicing old harnesses and re-flashed ECU’s from “Craigs List” tuners. FiTech’s Ultimate EFI is a complete Kit. Suitable for that junkyard 5.3 to a stroker 427, we have you covered! Check out the list of features and you will wonder why it’s never been so simple to ditch that old factory hardware or top off that fresh long block. We have taken the work out of getting your new or pull-out LS up and running in a flash. That’s why we call this kit the ULTIMATE EFI. Learn More
$2,154.99 Kit
Ultimate LS Fuel Injection Kit for LS3/L92 - 500HP w/o Trans. Control | FiTech - 70011 Part # 57-389142-1
The Fastest AND Easiest Way  To Get Your  New Pre-Owned LS Crate Engine Up And Running Eliminates Sourcing Mismatched Parts, Cutting & Splicing Old Harnesses, & Re-Flashed ECU's from "Craigs List" Tuners Black Anodized Aluminum Parts Are Corrosion Resistant & Look Tough Self-Learning ECU With Data Logging & Touch Screen Controller For Easy Setup & Configuration On The Fly Programmable Target Air Fuel Ratio & Timing (If Desired) Works With  All LS3 Engines 2008-2013 & L92 Engines (2007-2013) Supports Engines Up To 500 HP, Naturally Aspirated (Non-Forced Induction) NOTE:  MUST Use Factory Coil Pack Sub-Harness.  Does NOT Include Automatic Transmission Control SPECIFICATIONS: Quality Level:  High Performance Upgrade Intake Manifold Construction:  Fabricated Aluminum, 3MM, TIG Welded Intake Manifold Finish:  Black Anodized Aluminum With Embossed FiTech logo Intake Manifold RPM Range:  1,500 RPM to 6,500 RPM Metering Style:  Fully Sequential Fuel & Spark With Individual Cylinder Trim Tunability:  Use Programmable Or Self Tuning Throttle Body:  92MM Billet Aluminum, Black Anodized, Cable Operated, Progressive Linkage Pulley With Double Return Spring & Adjustable Stop, Parabolic Inlet Matching For Smooth Throttle Transitions (Same As OE) Fuel Rails:  High Flow Billet Aluminum, Black Anodized, AN Fittings & Fuel Crossover Fuel Injectors:  Flow Matched 36 Lb./Hour Engine Block Style:  Stock / OEM Standard Deck Coil Compatibility:  Factory Stock Car & Truck LS3 & L92 Crank & Cam Compatibility:  24X and 58X Custom Cam Friendly:  Yes Speedometer Output Driver:  Yes, Works With Most Speedometers Tachometer Output Driver:  Yes, Works With Most Tachometers (5V) Transmission Control:  No (Available With Different Model - 70012 & 70014) Compatible With Superchargers, Turbo, Nitrous:  No (Available With Different Model -  7013 750HP w/o Trans. Control or 70014 750HP w/Trans. Control) What's In The Box:  Low Profile 92MM Inlet, Aluminum Fabricated Intake, Billet Fuel Rails With AN Fittings & Fuel Crossover, Hi Flow Cable Operated 92MM Throttle Body, Progressive Linkage Pulley With Double Return Spring & Adjustable Stop, Electronics Calibration Module,Wiring Harness, Bosch Wide Band Controlled O2 Sensor (Self Learning), Stainless Steel Oxygen Sensor Bung (Clamp Or Weld-On), 1 Bar MAP Sensor, Coolant Temp. Sensor, IAT Sensor, TPS Sensor, IAC Motor, All Necessary Hardware & CNC Machined O-Ring Gaskets, ECM With Wiring Harness & Hand Held Controller w/Windshield Mount Manufacturer's Limited Warranty:  1-Year All Parts Except ECM, Lifetime On ECM Only Product Weight:  32.6 Lbs. Product Dimensions:  28" x 16" x 10" Complete Self Tuning Induction Systems for LS engines designed for the do-it-yourself Hot Rodder to the professional EFI tuner! This system is ready to go with everything needed to complete the induction system of your LS engine and get you on the road easily and faster than any system on the market today. Forget sourcing mismatched parts and cutting and splicing old harnesses and re-flashed ECU’s from “Craigs List” tuners. FiTech’s Ultimate EFI is a complete Kit. Suitable for that junkyard 5.3 to a stroker 427, we have you covered! Check out the list of features and you will wonder why it’s never been so simple to ditch that old factory hardware or top off that fresh long block. We have taken the work out of getting your new or pull-out LS up and running in a flash. That’s why we call this kit the ULTIMATE EFI. Learn More
$1,614.99 Kit
Ultimate LS Fuel Injection Kit for LS3/L92 - 500HP With Trans. Control | FiTech - 70012 Part # 57-389143-1
The Fastest AND Easiest Way  To Get Your  New  Or Pre-Owned  LS Crate Engine Up And Running Eliminates Sourcing Mismatched Parts, Cutting & Splicing Old Harnesses, & Re-Flashed ECU's from "Craigs List" Tuners Black Anodized Aluminum Parts Are Corrosion Resistant & Look Tough Self-Learning ECU With Data Logging & Touch Screen Controller For Easy Setup & Configuration On The Fly Programmable Target Air Fuel Ratio & Timing (If Desired) Built-In Transmission Control For GM 4L60, 4L65, 4L70, or 4L80 Automatic Transmissions Works With  All 2008-2013 LS3 & 2007-2013 L92 Supports Up To 500HP, Naturally Aspirated (Non-Forced Induction) NOTE:  MUST Use Factory Coil Pack Sub-Harness SPECIFICATIONS: Quality Level:  High Performance Upgrade Intake Manifold Construction:  Fabricated Aluminum, 3MM, TIG Welded Intake Manifold Finish:  Black Anodized Aluminum With Embossed FiTech logo Intake Manifold RPM Range:  1,500 RPM to 6,500 RPM Metering Style:  Fully Sequential Fuel & Spark With Individual Cylinder Trim Tunability:  Use Programmable Or Self Tuning Throttle Body:  92MM Billet Aluminum, Black Anodized, Cable Operated, Progressive Linkage Pulley With Double Return Spring & Adjustable Stop, Parabolic Inlet Matching For Smooth Throttle Transitions (Same As OE) Fuel Rails:  High Flow Billet Aluminum, Black Anodized, AN Fittings & Fuel Crossover Fuel Injectors:  Flow Matched 36 Lb./Hour Engine Block Style:  Stock / OEM Standard Deck Coil Compatibility:  Factory Stock Car & Truck LS3 & L92 Crank & Cam Compatibility:  24X and 58X Custom Cam Friendly:  Yes Speedometer Output Driver:  Yes, Works With Most Speedometers Tachometer Output Driver:  Yes, Works With Most Tachometers (5V) Transmission Control:    Included, Works With 4L60, 4L65, 4L70, or 4L80 G.M. Transmissions Compatible With Superchargers, Turbo, Nitrous:  No (Available With Different Model - 70014 750HP w/Trans. Control) What's In The Box:  Low Profile 92MM Inlet, Aluminum Fabricated Intake, Billet Fuel Rails With AN Fittings & Fuel Crossover, Hi Flow Cable Operated 92MM Throttle Body, Progressive Linkage Pulley With Double Return Spring & Adjustable Stop, Electronics Calibration Module,Wiring Harness, Bosch Wide Band Controlled O2 Sensor (Self Learning), Stainless Steel Oxygen Sensor Bung (Clamp Or Weld-On), 1 Bar MAP Sensor, Coolant Temp. Sensor, IAT Sensor, TPS Sensor, IAC Motor, All Necessary Hardware & CNC Machined O-Ring Gaskets, ECM With Wiring Harness & Hand Held Controller w/Windshield Mount, Installation Instructions Manufacturer's Limited Warranty:  1-Year All Parts Except ECM, Lifetime On ECM Only Product Weight:  32.6 Lbs. Product Dimensions:  28" x 16" x 10" Complete Self Tuning Induction Systems for LS engines designed for the do-it-yourself Hot Rodder to the professional EFI tuner! This system is ready to go with everything needed to complete the induction system of your LS engine and get you on the road easily and faster than any system on the market today. Forget sourcing mismatched parts and cutting and splicing old harnesses and re-flashed ECU’s from “Craigs List” tuners. FiTech’s Ultimate EFI is a complete Kit. Suitable for that junkyard 5.3 to a stroker 427, we have you covered! Check out the list of features and you will wonder why it’s never been so simple to ditch that old factory hardware or top off that fresh long block. We have taken the work out of getting your new or pull-out LS up and running in a flash. That’s why we call this kit the ULTIMATE EFI. Learn More
$1,885.99 Kit
Ultimate LS Fuel Injection Kit for LS3/L92 - 750HP w/o Trans. Control | FiTech - 70013 Part # 57-389144-1
The Fastest AND Easiest Way  To Get Your  New Or Pre-Owned LS Crate Engine Up And Running Eliminates Sourcing Mismatched Parts, Cutting & Splicing Old Harnesses, & Re-Flashed ECU's from "Craigs List" Tuners Black Anodized Aluminum Parts Are Corrosion Resistant & Look Tough Self-Learning ECU With Data Logging & Touch Screen Controller For Easy Setup & Configuration On The Fly Programmable Target Air Fuel Ratio & Timing (If Desired) Works With  All 2008-2013 LS3 Engines & 2007-2013 L92 Engines Supports Engines Up To 750 HP (Including Supercharged, Turbocharged, & Nitrous) NOTE:  MUST Use Factory Coil Pack Sub-Harness.  Does NOT Include Automatic Transmission Control SPECIFICATIONS: Quality Level:  High Performance Upgrade Intake Manifold Construction:  Fabricated Aluminum, 3MM, TIG Welded Intake Manifold Finish:  Black Anodized Aluminum With Embossed FiTech logo Intake Manifold RPM Range:  1,500 RPM to 6,500 RPM Metering Style:  Fully Sequential Fuel & Spark With Individual Cylinder Trim Tunability:  Use Programmable Or Self Tuning Throttle Body:  102MM Billet Aluminum, Black Anodized, Cable Operated, Progressive Linkage Pulley With Double Return Spring & Adjustable Stop, Parabolic Inlet Matching For Smooth Throttle Transitions (Same As OE) Fuel Rails:  High Flow Billet Aluminum, Black Anodized, AN Fittings & Fuel Crossover Fuel Injectors:  Flow Matched  66 Lb./Hour Engine Block Style:  Stock / OEM Standard Deck Coil Compatibility:  Factory Stock Car & Truck LS3 & L92 Crank & Cam Compatibility:  24X and 58X Custom Cam Friendly:  Yes Speedometer Output Driver:  Yes, Works With Most Speedometers Tachometer Output Driver:  Yes, Works With Most Tachometers (5V) Knock Sensor Control:  Yes O2 Sensor Control:  Yes, Dual Bosch Wide Band With Dual Trim Control (Self Learning) Transmission Control:  No (Available With Different Model - 70014) Compatible With Supercharger, Turbo, Nitrous:  Yes MAP Sensor:  3 Bar, Automatically Detects Up To 30 PSI Boost What's In The Box:  Low Profile 92MM Inlet, Aluminum Fabricated Intake, Billet Fuel Rails With AN Fittings & Fuel Crossover, Hi Flow Cable Operated 92MM Throttle Body, Progressive Linkage Pulley With Double Return Spring & Adjustable Stop, Electronics Calibration Module,Wiring Harness, Bosch Dual Wide Band Controlled O2 Sensor With Dual Trim Control  (Self Learning), Stainless Steel Oxygen Sensor Bung (Clamp Or Weld-On), 3 Bar MAP Sensor, Coolant Temp. Sensor, IAT Sensor, TPS Sensor, IAC Motor, All Necessary Hardware & CNC Machined O-Ring Gaskets, ECM With Wiring Harness & Hand Held Controller w/Windshield Mount Manufacturer's Limited Warranty:  1-Year All Parts Except ECM, Lifetime On ECM Only Product Weight:  32.6 Lbs. Product Dimensions:  28" x 16" x 10" Complete Self Tuning Induction Systems for LS engines designed for the do-it-yourself Hot Rodder to the professional EFI tuner! This system is ready to go with everything needed to complete the induction system of your LS engine and get you on the road easily and faster than any system on the market today. Forget sourcing mismatched parts and cutting and splicing old harnesses and re-flashed ECU’s from “Craigs List” tuners. FiTech’s Ultimate EFI is a complete Kit. Suitable for that junkyard 5.3 to a stroker 427, we have you covered! Check out the list of features and you will wonder why it’s never been so simple to ditch that old factory hardware or top off that fresh long block. We have taken the work out of getting your new or pull-out LS up and running in a flash. That’s why we call this kit the ULTIMATE EFI. Learn More
$1,885.99 Kit
Ultimate LS Kit for LS3/L92 - 750HP With Trans. Control | FiTech - 70014 Part # 57-389145-1
The Fastest AND Easiest Way  To Get Your  New Or Pull Out LS Crate Engine Up And Running Eliminates Sourcing Mismatched Parts, Cutting & Splicing Old Harnesses, & Re-Flashed ECU's from "Craigs List" Tuners Black Anodized Aluminum Parts Are Corrosion Resistant & Look Tough Self-Learning ECU With Data Logging & Touch Screen Controller For Easy Setup & Configuration On The Fly Programmable Target Air Fuel Ratio & Timing (If Desired) Works With  All  2008-2013 LS3  Engines & 2007-2013 L92 Engines Supports Engines Up To 750 HP  (including Supercharged, Turbocharged, & Nitrous) Includes Transmission Control For 4L60, 4L65, 4L70, or 4L80 G.M. transmissions NOTE:  MUST Use Factory Coil Pack Sub-Harness.  SPECIFICATIONS: Quality Level:  High Performance Upgrade Intake Manifold Construction:  Fabricated Aluminum, 3MM, TIG Welded Intake Manifold Finish:  Black Anodized Aluminum With Embossed FiTech logo Intake Manifold RPM Range:  1,500 RPM to 6,500 RPM Metering Style:  Fully Sequential Fuel & Spark With Individual Cylinder Trim Tunability:  Use Programmable Or Self Tuning Throttle Body:  102MM Billet Aluminum, Black Anodized, Cable Operated, Progressive Linkage Pulley With Double Return Spring & Adjustable Stop, Parabolic Inlet Matching For Smooth Throttle Transitions (Same As OE) Fuel Rails:  High Flow Billet Aluminum, Black Anodized, AN Fittings & Fuel Crossover Fuel Injectors:  Flow Matched  66 Lb./Hour Engine Block Style:  Stock / OEM Standard Deck Coil Compatibility:  Factory Stock Car & Truck LS1, LS6, LS2 Crank & Cam Compatibility:  24X and 58X Custom Cam Friendly:  Yes Speedometer Output Driver:  Yes, Works With Most Speedometers Tachometer Output Driver:  Yes, Works With Most Tachometers (5V) Knock Sensor Control:  Yes O2 Sensor Control:  Yes, Dual Bosch Wide Band With Dual Trim Control (Self Learning) Transmission Control:  No (Available With Different Model - 70004) Compatible With Supercharger, Turbo, Nitrous:  Yes MAP Sensor:  3 Bar, Automatically Detects Up To 30 PSI Boost What's In The Box:  Low Profile 92MM Inlet, Aluminum Fabricated Intake, Billet Fuel Rails With AN Fittings & Fuel Crossover, Hi Flow Cable Operated 92MM Throttle Body, Progressive Linkage Pulley With Double Return Spring & Adjustable Stop, Electronics Calibration Module,Wiring Harness, Bosch Dual Wide Band Controlled O2 Sensor With Dual Trim Control  (Self Learning), Stainless Steel Oxygen Sensor Bung (Clamp Or Weld-On),  3 Bar MAP Sensor, Coolant Temp. Sensor, IAT Sensor, TPS Sensor, IAC Motor, All Necessary Hardware & CNC Machined O-Ring Gaskets, ECM With Wiring Harness & Hand Held Controller w/Windshield Mount Manufacturer's Limited Warranty:  1-Year All Parts Except ECM, Lifetime On ECM Only Product Weight:  32.6 Lbs. Product Dimensions:  28" x 16" x 10" Complete Self Tuning Induction Systems for LS engines designed for the do-it-yourself Hot Rodder to the professional EFI tuner! This system is ready to go with everything needed to complete the induction system of your LS engine and get you on the road easily and faster than any system on the market today. Forget sourcing mismatched parts and cutting and splicing old harnesses and re-flashed ECU’s from “Craigs List” tuners. FiTech’s Ultimate EFI is a complete Kit. Suitable for that junkyard 5.3 to a stroker 427, we have you covered! Check out the list of features and you will wonder why it’s never been so simple to ditch that old factory hardware or top off that fresh long block. We have taken the work out of getting your new or pull-out LS up and running in a flash. That’s why we call this kit the ULTIMATE EFI. Learn More
$2,154.99 Kit
Edelbrock 15780 Carb E.O. D-215-85; Supercharger; Stage 1-Street Kit; 2007-2012; Gm; Gmt900; Ls Part # 57-399924-1
Now you can bolt-on an Edelbrock E-Force supercharger system and boost the power in your GM truck or suv. These GM supercharger systems are specially designed for each application and will allow you to boost your towing performance to impressive levels. These systems feature 12 long intake runners for maximum low end torque making them ideal for towing and off-road performance applications. All 2017-later GM truck & suv supercharger systems will require the ECM to be sent in for modification... No handheld programmer included. This is an 8-10 day process/waiting period from the time they are received! Systems #1560, #15600, #1561, #15610, #1577, #15770, #1578, #15780, #1579, #15790 require an Edelbrock supplemental fuel pump kit (sold separately, see below). Failure to use a supplemental fuel kit may result in engine damage and will void your warranty. #15790 will also fit 2007-08 1500 series trucks with a 6.0L engine (requires custom tune). Supercharger systems sold without tunes are only emissions legal when used with the correct Edelbrock tune, which can be downloaded on the supercharger tech support page. Learn More
$6,149.99 ea.
Edelbrock 1578 Carb E.O. D-215-85; Supercharger; Stage 1-Street Kit; 2007-2012; Gm; Gmt900; Ls Part # 57-399925-1
Now you can bolt-on an Edelbrock E-Force supercharger system and boost the power in your GM truck or suv. These GM supercharger systems are specially designed for each application and will allow you to boost your towing performance to impressive levels. These systems feature 12 long intake runners for maximum low end torque making them ideal for towing and off-road performance applications. * all 2017-later GM truck & suv supercharger systems will require the ECM to be sent in for modification... No handheld programmer included. This is an 8-10 day process/waiting period from the time they are received! Systems #1560, #15600, #1561, #15610, #1577, #15770, #1578, #15780, #1579, #15790 require an Edelbrock supplemental fuel pump kit (sold separately, see below). Failure to use a supplemental fuel kit may result in engine damage and will void your warranty. #15790 will also fit 2007-08 1500 series trucks with a 6.0L engine (requires custom tune). Supercharger systems sold without tunes are only emissions legal when used with the correct Edelbrock tune, which can be downloaded on the supercharger tech support page. Learn More
$6,519.99 ea.
Edelbrock 15029 Tensioner Upgrade Kit For #1598 Part # 57-400191-1
Tensioner upgrade kits are engineered to handle the increased belt stress encountered in high horsepower E-force applications. They are an upgrade for any Edelbrock supercharger system produced prior to February 2013 and are now included on all systems thereafter. Kits includes tensioner, tensioner mounting bracket, Gatorback drive belt and hardware. Learn More
$271.99 ea.
Edelbrock 15028 Tensioner Upgrade Kit For #1597 Part # 57-400192-1
Tensioner upgrade kits are engineered to handle the increased belt stress encountered in high horsepower E-force applications. They are an upgrade for any Edelbrock supercharger system produced prior to February 2013 and are now included on all systems thereafter. Kits includes tensioner, tensioner mounting bracket, Gatorback drive belt and hardware. Learn More
$275.99 ea.
Edelbrock 15032 Tensioner Upgrade Kit For #1596; 1599;/15597 Part # 57-400193-1
Tensioner upgrade kits are engineered to handle the increased belt stress encountered in high horsepower E-force applications. They are an upgrade for any Edelbrock supercharger system produced prior to February 2013 and are now included on all systems thereafter. Kits includes tensioner, tensioner mounting bracket, Gatorback drive belt and hardware. Learn More
$258.99 ea.
Edelbrock 15034 Tensioner Upgrade Kit For #1574; 1590;/1593 Part # 57-400194-1
Tensioner upgrade kits are engineered to handle the increased belt stress encountered in high horsepower E-force applications. They are an upgrade for any Edelbrock supercharger system produced prior to February 2013 and are now included on all systems thereafter. Kits includes tensioner, tensioner mounting bracket, Gatorback drive belt and hardware. Learn More
$277.99 ea.
Edelbrock 15039 Tensioner Upgrade Kit For #1573; 1576; 1592;/1595 Part # 57-400195-1
Tensioner upgrade kits are engineered to handle the increased belt stress encountered in high horsepower E-force applications. They are an upgrade for any Edelbrock supercharger system produced prior to February 2013 and are now included on all systems thereafter. Kits includes tensioner, tensioner mounting bracket, Gatorback drive belt and hardware. Learn More
$277.99 ea.
Edelbrock 15035 Tensioner Upgrade Kit For #1572; 1575; 1591;/1594 Part # 57-400196-1
Tensioner upgrade kits are engineered to handle the increased belt stress encountered in high horsepower E-force applications. They are an upgrade for any Edelbrock supercharger system produced prior to February 2013 and are now included on all systems thereafter. Kits includes tensioner, tensioner mounting bracket, Gatorback drive belt and hardware. Learn More
$278.99 ea.
Chevy Intake Manifold Kit, LS1 & LS6 Engine, Edelbrock, 1955-1957 Part # 57-250522-1
Allows You To Run A 4-Barrel Carburetor On The Fuel Injected LS Or Vortec Engines Dual Pattern Carburetor Flange For Square Or Spread Bore Uses Factory Sensors & Coils (Not Included) Works With Pre-2006 24X Crank Sensor Engines Only Solid State Electronics So, you have a carbureted small block and you keep seeing other Chevys making great great power with less cubic inches using the 1999-2005 LS engines. Here is your chance to use a late model (1999-2005) GM Vortec or 1997-2004 LS engine in your classic without all the computer and fuel injection junk. This kit, developed by MSD & Edelbrock, will let you use any Vortec 4.8, 5.3, 6.0, or the 5.7 LS1 or LS6 (1997-2004). The smaller 4.8 & 5.3 are plentiful and very affordable in salvage yards due to the complexity of the computer and wiring. All you need with this kit is a carburetor, the factory sensors and coil packs and the engine from the donor vehicle. The Edelbrock/MSD ignition controller plugs into the factory sensors and coil packs and handles all computer tasks, while the carburetor handles the fuel. The controller comes with 6 pre-set spark curves which will let you run whatever octane fuel you desire. Brackets are included to mount GM accelerator cables and TH350 & 700R4 Detent/Kickdown Cables. Learn More
$933.99 Kit
Chevy Fenton Intake Manifold, Aluminum, Dual Carb, 6-Cylinder, 1955-1957 Part # 57-257296-1
Split Intake Manifold Gives Improved Performance And Sound Fits 1955-62 235ci Engines Uses Two One-Barrels With 2-15/16" Bolt Spacing Includes Linkage And Fuel Line Kit Learn More
$235.99 Kit
Chevy Fenton Intake Manifold, Aluminum, Dual Carb, 6-Cylinder, Ceramic Coated, 1955-1957 Part # 57-257297-1
Split Intake Manifold Gives Improved Performance And Sound Silver Ceramic Coated Fits 1955-62 235ci Engines Uses Two One-Barrels With 2-15/16" Bolt Spacing Includes Linkage And Fuel Line Kit Learn More
$350.99 Kit
Classic Chevy Intake Manifold, Without EGR Valve, "Performer EPS", Edelbrock, 1955-1957 Part # 57-368552-1
High Quality Construction "Performer" Tri-Power Intake Manifold Idle-5500 RPM Will Not Fit HEI Fits 1958-1974 Small Block New from Eckler's Classic Chevy, the Edlebrock "Performer EPS" is an ideal performance replacement for any 1955-1957 Chevy small block that has performance cams and/or headers. The "Performer EPS" dramatically improves off-idle response & low end torque and the power extends all the way up to 5,500 RPM. The Holley carburetor bolts directly to the "Performer EPS" utilizing all stock brackets, fittings & cables. Rejetting of the carburetor or other modifications are not required and the manifold fits under all stock hoods. For 1963-68 327 engines, 1969 & later valve covers must be used. In addition to performance, this manifold provides your 1955, 1956, 1957 Chevy with a show-quality EnduraShine finish that won't oxidize, fade or turn blue and as an added bonus it cleans easily. As always, remember to trust Eckler's Classic Chevy for all your restoration needs. Learn More
$347.99 ea.
Items 1 to 24 of 86 total Show per page Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. Next Page
Grid  List