Product Experts Available 1-800-284-4096

CHEVY FIREWALL AND RELATED FOR ALL YEARS AND MODELS

Filter Your Result

BRAND
  1. (1)
  2. (3)
PRICE RANGE
  1. (9)
  2. (7)
  3. (7)
  4. (6)
  5. (4)
 
Items 1 to 24 of 33 total Show per page Page:
  1. 1
  2. 2
  3. Next Page
Grid  List 
Chevy Firewall Insulation Pad Fastener Set, 1956-1957 Part # 57-135506-1
Replacement For 1956 Reproduction Of Original For 1957-72 Molded Plastic 15-Piece Set Use To Install Firewall Pad & Steering Column Floor Seals The plastic fasteners for your 1955, 1956 or 1957 Chevy’s firewall insulation pad are necessary for keeping your insulation secure and working properly in your interior. Eckler’s Classic Chevy  offers these plastic fastener clips in a convenient 15 piece set so you never have to worry about ordering too few for the job. Don't wait to keep your firewall insulation pad secure! You can count on Eckler’s Classic Chevy for the parts you need foe every step of your 55, 56 or 57 Chevy restoration. Learn More
$6.79 Set
Chevy Firewall Grommet Set, 1957 Part # 57-131240-1
Reproduction Of Original Includes All Grommets From Firewall Forward This Chevy reproduction firewall grommet set has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit, finish and function will work superbly for your restoration. In addition, using a reproduction firewall grommet set from Eckler's will add authenticity and value to your Chevy. Learn More
$24.99 Set
Chevy Firewall Grommet Set, 1955 Part # 57-131238-1
Reproduction Of Original Includes All Grommets From Firewall Forward This Chevy reproduction firewall grommet set has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit, finish and function will work superbly for your restoration. In addition, using a reproduction firewall grommet set from Eckler's will add authenticity and value to your Chevy. Learn More
$42.99 Set
Chevy Firewall Grommet Set, 1956 Part # 57-131239-1
Reproduction Of Original Includes All Grommets From Firewall Forward This Chevy reproduction firewall grommet set has been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit, finish and function will work superbly for your restoration. In addition, using a reproduction firewall grommet set from Eckler's will add authenticity and value to your Chevy. Learn More
$43.99 Set
Chevy Firewall Pad Fastener, 1955 Part # 57-135375-1
Accurate Reproduction Of 1955  Chevy  Firewall  Pad Clip Fastener High Quality Spring Steel Correct Profile With Correct Coating 100% Correct For Judged Competitions 13 Required Per Car When you are looking to do your 1955 Chevrolet Tri-5 the right way, Eckler's Classic Chevy has the parts you need. This firewall pad clip is exclusive to the 1955 Chevrolet Bel Air, 150, 210 Nomad and wagon. Correct fasteners can make or break a restoration that is going to be judged. Don't lose valuable points on your car by using an incorrect "Christmas tree" fastener. Trust Eckler's Classic Chevy for all your Chevrolet parts needs always at the best possible price. Learn More
$4.99 ea.
Chevy Main Firewall, Speedometer Cable Grommet, 1955-1956 Part # 57-131200-1
Reproduction Of Original 1-5/8" Diameter Wiring Harness & Speedometer Cable Pass-Through For 1955 Speedometer Cable Pass-Through For 1956 Eckler's Select Series Learn More
$5.99 ea.
Chevy Steering Column Firewall Seal, For Cars With Automatic Transmission, Best Quality, 1955-1957 Part # 57-131195-1
Best Quality Reproduction Firewall Seal  Works With All Original Or Aftermarket Automatic Transmissions Original Density Foam Rubber Seal Fits Between Firewall & Firewall Pad To Keep Engine Heat In The Engine Bay Where It Belongs Eckler's Select Series Eckler's knows your firewall seal has probably seen better days because gets baked by engine heat every time you drive your Bel Air, Nomad, 210 or 150. If this firewall seal gets damaged or cracked, heat and noxious fumes will get into the engine compartment. Ecklers Classic Chevy has the best parts for your 1955, 1956 & 1957 Tri-Five Chevy always at the best possible price. Learn More
$19.99 ea.
Chevy Floor Seal, Automatic Transmission, 1955-1956 Part # 57-130860-1
High Quality Reproduction  Floor Seal Black Rubber  And  An Exact  Duplicate  Of  The GM  Original Seals Around  Steering Column & Covers Carpet  Works With All Original Or Aftermarket Automatic Transmissions Seal Will Need To Be Split If The Steering Column Is Not Removed From The Car Weatherstripping and seals are always the first things to deteriorate on your 1955 or 1956 Chevrolet Bel Air, 150, 210, Nomad or wagon. Eckler's Classic Chevy has this floor seal that goes around the steering column and over the carpet to seal over the actual column seal and keep the carpet out of the way of the pedals. This steering column floor seal is an exact duplicate of the original GM part and must be installed that was as well. If you do not wish to remove your steering column, the floor seal must be split to go around the column before using the fasteners. Trust Ecklers Classic Chevy for all your Chevy parts needs and enjoy the best parts at the best price. Learn More
$14.49 ea.
Chevy Steering Column Firewall Seal, For Cars With Manual Transmission, Best Quality, 1955-1957 Part # 57-131198-1
Best Quality Reproduction Firewall Seal Works With All Original Or Aftermarket  Manual Transmissions Original Density Foam Rubber Seal Fits Between Firewall & Firewall Pad To Keep Engine Heat In The Engine Bay Where It Belongs Eckler's Select Series Eckler's knows your firewall seal has probably seen better days because gets baked by engine heat every time you drive your Bel Air, Nomad, 210 or 150. If this firewall seal gets damaged or cracked, heat and noxious fumes will get into the engine compartment. Ecklers Classic Chevy has the best parts for your 1955, 1956 & 1957 Tri-Five Chevy always at the best possible price. Learn More
$18.99 ea.
Chevy Firewall Insulation Pad, Original Style, 1957 Part # 57-163223-1
Reproduction Of The Original  Cardboard Pad Includes Insulation & Lower Rubber Edge Seal All Holes/Cutouts Pre-Punched For Easy Installation Requires Fasteners P/N 34-39 This Chevy firewall insulation pad is a reproduction of the original firewall and dash pad that covers the entire inner firewall. Original pads often harden, crack and fall apart; significantly reducing their heat and sound insulation capabilities. The original Chevy pads can even become a fire hazard; so be sure to inspect yours and replace if necessary. Be sure to make this decision early in the restoration process, as this pad is the first item to install under your dash before wiring, gauges, heater, etc… Unlike the reproduction flat pads, this one is just like original, so no shaping is required to fit the firewall The 1957 firewall pads are 2-piece, split at the steering column as original which makes installation a snap. All of the heater, wiring, hood hinge, steering column and fastener holes are pre-punched for easy installation. These punch-outs may be left intact if you car is not equipped with a heater or for custom installations. The firewall insulation pad uses one set of 15 pad fasteners P/N 34-39; the same as the original Chevy pad in your classic. The lower rubber seal that overlaps the forward carpet is double sewn just like original. For a proper, complete restoration install one of our new Chevy firewall insulation pads! Learn More
$124.99 ea.
Chevy Main Wiring Harness Grommet, At Firewall, Early Cars,1955 Part # 57-131223-1
Reproduction Of Original 1955 Early Production Application Installs Behind Battery Area Learn More
$5.99 ea.
Chevy Floor Seal, Automatic Transmission, 1957 Part # 57-130862-1
Reproduction Of Orignal Works With All Original Or Aftermarket Automatic Transmissions Eckler's Select Series Learn More
$14.49 ea.
Chevy Firewall Insulation Pad, 1957 Part # 57-130976-1
Reproduction Of The Original Cardboard Pad Includes Insulation & Lower Rubber Edge Seal All Holes/Cutouts Pre-Punched For Easy Installation This Chevy firewall insulation pad is a reproduction of the original firewall and dash pad that covers the entire inner firewall. Original pads often harden, crack and fall apart; significantly reducing their heat and sound insulation capabilities. The original Chevy pads can even become a fire hazard; so be sure to inspect yours and replace if necessary. Be sure to make this decision early in the restoration process, as this pad is the first item to install under your dash before wiring, gauges, heater, etc…The new pad is manufactured and shipped flat, so some shaping is required to fit the firewall. The 1957 firewall pads are 2-piece, split at the steering column as original which makes installation a snap. All of the heater, wiring, hood hinge, steering column and fastener holes are pre-punched for easy installation. These punch-outs may be left intact if you car is not equipped with a heater or for custom installations. The firewall insulation pad uses one set of 15 pad fasteners P/N 34-39; the same as the original Chevy pad in your classic. The lower rubber seal that overlaps the forward carpet is double sewn just like original. For a proper, complete restoration install one of our new Chevy firewall insulation pads! Learn More
$47.99 ea.
Chevy Firewall Insulation Pad, 1955 Part # 57-130974-1
Reproduction Of The Original Cardboard Pad Includes Insulation & Lower Rubber Edge Seal All Holes/Cutouts Pre-Punched For Easy Installation This Chevy firewall insulation pad is a reproduction of the original firewall and dash pad that covers the entire inner firewall. Original pads often harden, crack and fall apart; significantly reducing their heat and sound insulation capabilities. The original Chevy pads can even become a fire hazard; so be sure to inspect yours and replace if necessary. Be sure to make this decision early in the restoration process, as this pad is the first item to install under your dash before wiring, gauges, heater, etc…The new pad is manufactured and shipped flat, so some shaping is required to fit the firewall. All of the heater, wiring, hood hinge, steering column and fastener holes are pre-punched for easy installation. These punch-outs may be left intact if you car is not equipped with a heater or for custom installations. The firewall insulation pad uses 13 pad fasteners P/N 34-109; the same as the original Chevy pad in your classic. The lower rubber seal that overlaps the forward carpet is double sewn just like original. For a proper, complete restoration install one of our new Chevy firewall insulation pads! Learn More
$47.99 ea.
Chevy Firewall Insulation Pad, Original Style, 1955 Part # 57-163222-1
Reproduction Of The Original Cardboard Pad Includes Insulation & Lower Rubber Edge Seal All Holes/Cutouts Pre-Punched For Easy Installation Requires (13) Fasteners P/N 34-109 This Chevy firewall insulation pad is a reproduction of the original firewall and dash pad that covers the entire inner firewall. Original pads often harden, crack and fall apart; significantly reducing their heat and sound insulation capabilities. The original Chevy pads can even become a fire hazard; so be sure to inspect yours and replace if necessary. Be sure to make this decision early in the restoration process, as this pad is the first item to install under your dash before wiring, gauges, heater, etc…The new pad is manufactured and shipped flat, so some shaping is required to fit the firewall. All of the heater, wiring, hood hinge, steering column and fastener holes are pre-punched for easy installation. These punch-outs may be left intact if you car is not equipped with a heater or for custom installations. The firewall insulation pad uses 13 pad fasteners P/N 34-109; the same as the original Chevy pad in your classic. The lower rubber seal that overlaps the forward carpet is double sewn just like original. For a proper, complete restoration install one of our new Chevy firewall insulation pads! Learn More
$99.99 ea.
Chevy Firewall Pad Fastener, 1956 Part # 57-170166-1
Reproduction Of Original Secures Firewall Pad & Steering Column Seals 14 Required Per Car Learn More
$4.99 ea.
Chevy Shift Floor Seal, Manual Transmission, 1957 Part # 57-130861-1
Reproduction Of Original Fits At Base Of Steering Column Holds Sponge-Rubber Seal To Firewall Also Requires Use Of Felt Shaft Seal P/N 05-18 Eckler's Select Series Learn More
$14.49 ea.
Chevy Shift Floor Seal, Manual Transmission, 1955-1956 Part # 57-130859-1
Reproduction Of Original Fits At Base Of Steering Column Holds Sponge-Rubber Seal To Firewall Also Requires Use Of Felt Shaft Seal P/N 05-18    Eckler's Select Series  Learn More
$14.49 ea.
1956 Chevy Firewall Insulation Pad Original Style Part # 57-163224-1
Reproduction Of The Original  Cardboard Pad Includes Insulation & Lower Rubber Edge Seal All Holes/Cutouts Pre-Punched For Easy Installation Requires Fasteners P/N 34-39 This Chevy firewall insulation pad is an exact reproduction of the original firewall and dash pad that covers the entire inner firewall. Original pads often harden, crack and fall apart; significantly reducing their heat and sound insulation capabilities. The original Chevy pads can even become a fire hazard; so be sure to inspect yours and replace if necessary. Be sure to make this decision early in the restoration process, as this pad is the first item to install under your dash before wiring, gauges, heater, etc… Unlike the reproduction flat pads, this one is made like original so no shaping is required to fit the firewall. All of the heater, wiring, hood hinge, steering column and fastener holes are pre-punched for easy installation. These punch-outs may be left intact if you car is not equipped with a heater or for custom installations. The firewall insulation pad uses one set of 15 pad fasteners P/N 34-39; the same as the original Chevy pad in your classic. The lower rubber seal that overlaps the forward carpet is double sewn just like original. For a proper, complete restoration install one of our new Chevy firewall insulation pads Learn More
$119.99 ea.
Chevy Firewall Insulation Pad, 1956 Part # 57-130975-1
Reproduction Of The Original Cardboard Pad Includes Insulation & Lower Rubber Edge Seal All Holes/Cutouts Pre-Punched For Easy Installation This Chevy firewall insulation pad is a reproduction of the original firewall and dash pad that covers the entire inner firewall. Original pads often harden, crack and fall apart; significantly reducing their heat and sound insulation capabilities. The original Chevy pads can even become a fire hazard; so be sure to inspect yours and replace if necessary. Be sure to make this decision early in the restoration process, as this pad is the first item to install under your dash before wiring, gauges, heater, etc…The new pad is manufactured and shipped flat, so some shaping is required to fit the firewall. All of the heater, wiring, hood hinge, steering column and fastener holes are pre-punched for easy installation. These punch-outs may be left intact if you car is not equipped with a heater or for custom installations. The firewall insulation pad uses one set of 15 pad fasteners P/N 34-39; the same as the original Chevy pad in your classic. The lower rubber seal that overlaps the forward carpet is double sewn just like original. For a proper, complete restoration install one of our new Chevy firewall insulation pads! Learn More
$47.99 ea.
Chevy Firewall Plate Retainers, Polished Billet Aluminum, 1957 Part # 57-162707-1
Beautiful Polished Billet Aluminum Use To Secure Stock Or Aluminum Firewall Plates Easy To Install These awesome billet aluminum firewall plate retainers are just the ticket to finish the installation of your 1957 Chevy firewall plate. They install directly onto the stock firewall heater opening pins. Dress up your classic Chevy underhood with a set of these sharp looking polished aluminum Chevy firewall plate retainers. Learn More
$35.99 Set
Chevy ABS Firewall Insulation Pad, Molded, 1955 Part # 57-131012-1
Replacement ABS Plastic Far More Durable Than The Original Molded Cardboard Pad Includes Insulation & Lower Rubber Edge Seal All Holes/Cutouts Pre-Punched For Easy Installation This molded ABS Chevy firewall insulation pad is an updated replacement of the original firewall and dash pad that covers the entire inner firewall. This pad is made of tough black ABS plastic and has heat and sound insulation qualities far superior to the original Chevy cardboard firewall pad. In addition, the plastic is far easier to clean and maintain and soil resistant than the cardboard. The construction of this pad makes it the perfect upgrade for your custom car. The original Chevy pads can even become a fire hazard; so be sure to inspect yours and replace if necessary. Be sure to make this decision early in the restoration process, as this pad is the first item to install under your dash before wiring, gauges, heater, etc…This ABS pad is fully molded so no shaping is required to fit the firewall. All of the heater, wiring, hood hinge, steering column and fastener holes are pre-punched for easy installation. These punch-outs may be left intact if you car is not equipped with a heater or for custom installations. The firewall insulation pad uses 13 pad fasteners P/N 34-109; the same as the original Chevy pad in your classic. The lower rubber seal that overlaps the forward carpet is double sewn just like original. For a great custom upgrade on your classic, install one of our new molded Chevy ABS firewall insulation pads! Learn More
$256.99 ea.
Chevy ABS Firewall Insulation Pad, Molded, 1957 Part # 57-131014-1
Replacement ABS Plastic Far More Durable Than The Original Molded Cardboard Pad Includes Insulation & Lower Rubber Edge Seal All Holes/Cutouts Pre-Punched For Easy Installation This molded ABS Chevy firewall insulation pad is an updated replacement of the original firewall and dash pad that covers the entire inner firewall. This pad is made of tough black ABS plastic and has heat and sound insulation qualities far superior to the original Chevy cardboard firewall pad. In addition, the plastic is far easier to clean and maintain and soil resistant than the cardboard. The construction of this pad makes it the perfect upgrade for your custom car. The original Chevy pads can even become a fire hazard; so be sure to inspect yours and replace if necessary. Be sure to make this decision early in the restoration process, as this pad is the first item to install under your dash before wiring, gauges, heater, etc… The 1957 firewall pads are 2-piece, split at the steering column as original which makes installation a snap. This ABS pad is fully molded so no shaping is required to fit the firewall. All of the heater, wiring, hood hinge, steering column and fastener holes are pre-punched for easy installation. These punch-outs may be left intact if you car is not equipped with a heater or for custom installations. The firewall insulation pad uses one set of 15 pad fasteners P/N 34-39; the same as the original Chevy pad in your classic. The lower rubber seal that overlaps the forward carpet is double sewn just like original. For a great custom upgrade on your classic, install one of our new molded Chevy ABS firewall insulation pads! Learn More
$247.99 ea.
Items 1 to 24 of 33 total Show per page Page:
  1. 1
  2. 2
  3. Next Page
Grid  List