Product Experts Available 1-800-284-4096

CHEVY BEL AIR, 210 & 150 SHOCK ABSORBER MOUNTS AND RELATED FOR ALL YEARS AND MODELS

Filter Your Result

PRICE RANGE
  1. (1)
  2. (7)
  3. (3)
 
11 Item(s) Show per page Grid  List 
$31.99 Kit
Chevy Rear Shock Bar Re-Location Kit W/ KYB GR-2 Shocks For Standard Or Lowered Cars, 1-Piece Frame, 1955-1957 Part # 57-388262-1
Buy The Kit Save Some $$$ For Use On Cars With 1-Piece (No Weld Seam Down The Middle) Frames  Relocates Shocks From Trunk Floor To Frame  Easy Bolt-In Design Special Curve In Bar Designed To Clear Rear End On Lowered Cars  Shock Bar is 35-1/4" Width  Comes With KYB GR-2 Shocks Perhaps the easiest, single most important modification you can make to your classic Chevy; the rear shock bar relocation kit. The original 1955-57 Chevys were poorly designed in this area. The rear shocks bolted directly to the trunk floor. This shock relocation kit moves the upper rear shock mount location down to the frame where Chevrolet should have put them! To install the shock bar, all that is required is drilling 4 holes in the frame and bolt it in. This rear shock bar relocation kit may be used with stock and replacement rear shocks; no special shock absorbers are required. We like the KYB GR-2 Shocks and that is what is included in this kit. It will fit all passenger cars, wagons, Nomads and deliverys. Instructions and hardware are included to make installation easy. Improve your ride today with our Chevy rear shock bar & shock relocation kit! Learn More
$144.99 Kit
Chevy Rear Shock Bar Re-Location Kit W/ KYB GR-2 Shocks For Standard Or Lowered Cars, 2-Piece Frame, 1955-1957 Part # 57-388271-1
Buy The Kit Save Some $$$ For Use On Cars With 2-Piece (Weld Seam Down The Middle) Frames  Relocates Shocks From Trunk Floor To Frame  Easy Bolt-In Design Special Curve In Bar Designed To Clear Rear End On Lowered Cars  Shock Bar is 36" Width  Comes With KYB GR-2 Shocks Perhaps the easiest, single most important modification you can make to your classic Chevy; the rear shock bar relocation kit. The original 1955-57 Chevys were poorly designed in this area. The rear shocks bolted directly to the trunk floor. This shock relocation kit moves the upper rear shock mount location down to the frame where Chevrolet should have put them! To install the shock bar, all that is required is drilling 4 holes in the frame and bolt it in. This rear shock bar relocation kit may be used with stock and replacement rear shocks; no special shock absorbers are required. We like the KYB GR-2 Shocks and that is what is included in this kit. It will fit all passenger cars, wagons, Nomads and deliverys. Instructions and hardware are included to make installation easy. Improve your ride today with our Chevy rear shock bar & shock relocation kit! Learn More
$144.99 Kit
Chevy Shock Bar, Rear Relocation Kit, 2-Piece Frame, 1955-1957 Part # 57-133287-1
Relocates Rear Shocks To Prevent Trunk Floor Damage Improves Ride Quality Easy Bolt-On Installation Perhaps the easiest, single most important modification you can make to your classic Chevy; the rear shock bar relocation kit. The original 1955-57 Chevys were poorly designed in this area. The rear shocks bolted directly to the trunk floor. This shock relocation kit moves the upper rear shock mount location down to the frame where Chevrolet should have put them! To install the shock bar, all that is required is drilling 4 holes in the frame and bolt it in. This rear shock bar relocation kit may be used with stock and replacement rear shocks; no special shock absorbers are required. It is 36" wide and is designed to be used with 2-piece frame cars with the weld seam down the bottom center of the frame rails. It will fit all passenger cars, wagons, Nomads and deliverys. Instructions and hardware are included to make installation easy. Improve your ride today with our Chevy rear shock bar relocation kit! Learn More

Was: $59.99 Kit

Now: $52.99 Kit

Chevy Shock Bar, Rear Relocation Kit, 1-Piece Frame, 1955-1957 Part # 57-133338-1
Relocates Rear Shocks To Prevent Trunk Floor Damage Improves Ride Quality Easy Bolt-On Installation Perhaps the easiest, single most important modification you can make to your classic Chevy; the rear shock bar relocation kit. The original 1955-57 Chevys were poorly designed in this area. The rear shocks bolted directly to the trunk floor. This shock relocation kit moves the upper rear shock mount location down to the frame where Chevrolet should have put them! To install the shock bar, all that is required is drilling 4 holes in the frame and bolt it in. This rear shock bar relocation kit may be used with stock and replacement rear shocks; no special shock absorbers are required. It is 35-1/4" wide and is designed to be used with 1-piece frame cars with no weld seam down the bottom center of the frame rails. It will fit all passenger cars, wagons, Nomads and Deliverys. Instructions and hardware are included to make installation easy. Improve your ride today with our Chevy rear shock bar relocation kit! Learn More
$64.99 Kit
Chevy Shock Location Kit, Rear, For Standard Height Or Lowered Cars, 2-Piece Frame, 1955-1957 Part # 57-161066-1
Replacement Kit For Use On Cars With 2-Piece (Weld Seam Down The Middle) Frames Relocates Shocks From Trunk Floor To Frame Special Curve In Bar Designed To Clear Rear End On Lowered Cars 36" Width Learn More
$97.99 Kit
Chevy Shock Relocation Kit, Rear, For Standard Height Or Lowered Cars, 1-Piece Frame, 1955-1957 Part # 57-161067-1
Replacement Kit For Use On Cars With 1-Piece (No Weld Seam Down The Middle) Frames Relocates Shocks From Trunk Floor To Frame Special Curve In Bar Designed To Clear Rear End On Lowered Cars 35-1/4" Width Learn More
$92.99 Kit
Chevy Shock Mounting Plate, Right, Lower, Rear, 1955-1957 Part # 57-133337-1
High Quality Reproduction Laser Cut Heavy Gauge Steel Not Universal, For Left Side (Driver Side) Mounts To Bottom Of Rear Leaf Springs   Lower shock mounts, like all metal can become rusted over time. your rear suspension is too imoprtant to reuse rusted shock mounts or try to use a universal mount. Eckler's Classic Chevy offers shock mountng plates designed to perfectly replace rusted or damaged originals. these shock mount plates are laser cut from heavy gauge steel and, unlike universal mounting plates, are side specific. Eckler's Classic Chevy is here for your every step of your 1955, 1956 or 1957 Chevy restoration.   Learn More
$59.99 ea.
Chevy Shock Mounting Plate, Left, Lower, Rear, 1955-1957 Part # 57-133336-1
High Quality Reproduction Laser Cut Heavy Gauge Steel Not Universal, For Left Side (Driver Side) Mounts To Bottom Of Rear Leaf Springs   Lower shock mounts, like all metal can become rusted over time. your rear suspension is too imoprtant to reuse rusted shock mounts or try to use a universal mount. Eckler's Classic Chevy offers shock mountng plates designed to perfectly replace rusted or damaged originals. these shock mount plates are laser cut from heavy gauge steel and, unlike universal mounting plates, are side specific. Eckler's Classic Chevy is here for your every step of your 1955, 1956 or 1957 Chevy restoration. Learn More
$44.99 ea.
Chevy Shock Mounting Plates, 1955-1957 Part # 57-190366-1
Reproductions Of Original Mounts To Bottom Of Rear Leaf Springs These Chevy reproduction shock mounting plates have been manufactured to original factory specifications using today's modern manufacturing techniques. You will find the fit and function will work superbly for your restoration. In addition, using reproduction shock mounting plates from Eckler's will add authenticity and value to your Chevy. Learn More
$109.99 PR
11 Item(s) Show per page Grid  List