1967-1972 Chevy-GMC Truck Power Rack And Pinion Steering Kit, Disc Brakes, Serpentine Belt With Stock Steering Column, Half-Ton 2WD

• Kit includes:
• Rack & pinion
• Mounting bracket
• Steering shaft kit
• Pump & line kit
• Mounting hardware
• Outer tie rod ends
• Steering column not included

Unisteer’s rack and pinion kit uses a traditional style rear steer rack & pinion that is mounted to a one piece bracket which bolts up to the outside of either frame rail in the same holes as the original steering box and idler arms.
This kit is for rear wheel drive vehicles only, NOT 4x4s. Installs have been done on V-8s, so there should be room if using a 6 Cylinder. There is quite a bit of room for the shaft support, but some headers may require modification. A two groove pulley on your water pump is required for this kit.

Unisteer's C10 rack and pinion conversion kit dramatically improves handling and steering response