57 Chevy Flaming River Collapsible Steering Column, Tilt Function, Paintable Finish, (Floor Shifter)

• Made In The USA!
• Tilt Steering Column For Use With Floor Mount Shifters 
• Customized For 1957 Chevrolet 
• 2-Inch Outer Diameter Tube, Compact Shroud
• 1-Inch DD Shaft
• Upper Shroud Length - 6 3/8" 
• Non-Keyed Column (For Cars With Dashboard Ignition Switch) 
• Includes Tilt/Turn Signal Levers, Hazard Knob, Wiring, and Canceling Cam
• Paintable Mill Finish For Owner Customization
• Choose a Ready-To-Fit Flaming River Steering Wheel 
• Fits Aftermarket Steering Wheels (May Need Bolt-Pattern Adapters - Not Included)

NOTE: Intricate diamond laser pattern with bellowed rings enables the tube to fold upon impact with 2 inches of collapsibility. Center tilt shaft has a unique shear pin design which allows full collapsibility.

Eckler's Flaming River Floor Shift Tilt Steering Column features a 2" tube diameter and compact shroud to create a unique new custom look. Each column comes complete with a stainless steel dress up kit (Tilt/turn signal levers and hazard knob), GM wiring (4-1/4in. connector) and an all new canceling cam. These columns can connect to a factory linkage using a universal joint or a rag joint. All Flaming River Tri-Five columns come standard with a one-inch DD output shaft, so keep that in mind when designing steering linkage and selecting the appropriate couplers. Eckler's Flaming River columns also come with a GM tapered and splined top shaft. This allows you to use any original GM steering wheel from 1968 and later. The majority of aftermarket steering wheels will fit onto these steering columns with the use of a steering wheel adapter.

Flaming River Paintable Finish columns are made from 304 grade stainless steel in paintable mill finish. It will never rust, is chemically clean and can be painted to match or highlight your Classic Chevy's interior. You’ve opted for an unpainted, mill finish column.  If you’re planning to apply a hue to it yourself, pre-treat with an abrasive pad to even out the finish and prepare it for paint. The column shroud and tube should then be primered prior to laying down the paintwork. Make sure you put the column through all of the tilt positions to ensure you have full coverage and haven’t missed any spots. Don't risk the column's integrity by taking it apart to paint. Avoid using clear coat finishes as well. Metal polish is a great alternative, like Eckler's P/N 57-380300-1.

1957 Chevy Tri-Five Tilt Steering Column For Use With Floor Shifters, 2" OD, Paintable Finish