MSD Blaster 2 Chrome Coil

• Improved output coil for stock points or electronic ignitions, Blaster Ignition or MSD 5, 6, and 7 Series
• Supplied with two spark plug wire boots, terminals and a ballast resistor (required if used with stock points ignition)
• 100:1 turns ratio and lower primary resistance produce high voltage output
• Chrome metal canister is filled with a premium grade oil for cooling
• CARB E.O. Approved

If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD Blaster Ignition, this MSD Blaster 2 Coil is the right choice. Blaster Coils are designed for improved spark output! Special 100:1 windings are used to provide maximum build-up of voltage! These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics, while wide spaced brass primary terminals prevent the possibility of shorting out. Each Blaster Coil can be used with a stock ignition, Blaster Ignition, or MSD 5, 6 or 7 Ignition Control. Most late model vehicles with electronic ignitions do not require a ballast resistor.  Check your ignition and manufacturers specifications to determine if a ballast is required in your application. Mallory Unilite applications do require a ballast resistor.

If you are looking to upgrade your stock coil this MSD Blaster 2 is the right choice