Shifter Lever, Lokar, Single Bend, for Tremec/Borg Warner T5, T45, T56 Manual Transmissions, Chrome Finish

• Made In The USA
• Includes Shift Handle and Mounting Bolts
• Chrome on Steel
• Boot, Linkage, and Knob Not Included
• Choose Between 16", 12", or 10"

Lokar manual transmission shifter levers are direct bolt-on sticks for Tremec and Borg Warner manual transmissions. These tubular levers are built for stock and aftermarket 5- and 6-speed shifters. They fit the T5, T45, T56, and Tremec shifters with the standard 2-bolt flange that measures 7/8 in. center to center between bolt holes. To give you a clean, smooth appearance, these levers feature a machined mounting stud, drilled and countersunk for the included metric cap screws. The shifter levers offer a 3/8-24 in. knob thread and are available in 10, 12, and 16 in. single or 16 in. double bends. Choose the style, and length to best complement your ride. All Lokar products are made in the USA and carry a lifetime warranty.

Specifications: Threaded top for knob attachment is .373 or 3/8” x 24 threads per inch. 2 mounting holes on bottom are .879 or 7/8” center to center. Attachment bolts included are 5/16 allen head cap screws. Shouldered area at bottom is 2.01 or 2” tall and .760 or approximately 3/4” O.D. O.D. at bottom above shouldered area is .627 or 5/8”. O.D. at top below lock nut is .386 or 3/8”. Overall length from bottom to top is 14”. Length from center of top mounting hole to center of bend is 5”. From center of bend to end of threads on top is 7-1/2”.

Lokar Single Bend Shifter Lever for Tremec/Borg Warner T5, T45, T56 Manual Transmissions, Chrome Finish