Technical

Time: 1 hour (approximately)

Tools: standard socket set, standard wrenches

Cost: approximately $175-200

Tinware: front sway bar, new sway bar bushings, new sway bar end links (recommended), lubrication grease

Tip: Before removing anything from the car, take note of the sequence of the bushings in relation to the lower control arm and the sway bar. This will eliminate any confusion during reassembly.

Performance gains: a tighter, better-handling front end and longer lasting components

Time: Approx. 2 hours

Tools: standard wrenches, small flat-blade screwdriver, razor blade

Cost: approximately $75

Tinware: transmission cooler and installation hardware (included in most kits)

Tip: Allow the transmission to completely cool before attempting to drain the fluid or disconnect any lines under pressure.

Performance gains: a cooler, more efficient transmission capable of handling increased loads and horsepower

http://www.youtube.com/watch?v=zqJ5UwH8zU8
The Ecklers Classic Series shows while a older, very informative videos which we’ve made in the past! Today we show the Radio Noise Suppression Kit by Custom Auto Sound!
Subscribe Today: http://www.youtube.com/subscription_center?add_user=EcklersAutomotive

Product Link And Description Below:

The Eckler's Auto Hub is your one stop for all your car restoration needs, we are constantly adding new videos to help you with your installation, feature great products or just provide entertainment. So check out our videos and individual channels below and don't forget to subscribe to get even more daily videos!